Vari Lite Virtuoso DX Manuel d'utilisateur télécharger pdf (Page 61)

OPERATION : LUMINAIRE TIMING

02.9673.0001 C 17-Sep-02 43

Control Channel Functions

The following control actions must be accomplished with zero time transition or with

timing disabled. Discrete values must be used and not manual controls such as faders

or encoders.

To use control channel functions:

Step 1. Select an action to be sent.

Step 2. Set control channel value for desired action (for example, 84 for reset). Hold

value for 3 seconds.

Note: A numerical keypad is required for sending values. An encoder or fader does

not allow for a “snap” value change, which is required to affect the control functions.

Step 3. Set control channel value to zero. (This must occur without any scaling

values. Action will be voided if other values are detected between action

value and zero.)

Table 3-10: Control Channel Functions

Control

Channel

Function

Control Channel Value

% Value

For 3 Secs

or Greater

After

3 Secs

Display On 1 1-4 0

Luminaire Reset 33 81 - 87 0

Lamp Off 66 165 - 171 0

Lamp On 99 249 - 255 0

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 122 123

Pas de commentaire

Vari Lite Virtuoso DX Manuel d'utilisateur Page 61